How an epoxy garage floor install usually goes
- Look and measure: the installer measures the garage and checks the slab for cracks, old sealers, oil stains and moisture.
- Prep: the concrete is mechanically ground so the coating can bond. This is the step that decides whether a floor lasts.
- Repair: cracks, chips and pitted areas are filled and ground smooth.
- Coat: the base coat goes down, followed by flakes if you want them, then one or more topcoats.
- Cure: you stay off the floor for the cure time the installer gives you before walking on it, then before parking on it.
Read how long an epoxy garage floor lasts for what makes the difference.
Why a professional install, not a kit
Most epoxy floors that peel do so because the slab was acid-etched or just cleaned instead of properly ground, or because moisture was coming up through the concrete. A contractor brings grinding equipment, industrial-grade coating systems and experience reading a slab. Store kits are thinner and depend entirely on prep that is hard to do well without the right tools.
Front Range conditions
Colorado Springs garages see freeze and thaw, de-icing chemicals tracked in on tires, strong high-altitude sun through an open door and big temperature swings between day and night. Those conditions are why topcoat choice, UV stability and the temperature on install day all matter. Ask your installer how their system handles each one.